Five services · one honest standard

Garment inspection services in Bangladesh.

Inspection, brand-direct QA, audit, assessment and improvement for textile and apparel. We go to the factory, check the facts and tell you straight what we find.

Request a quote See a sample report
  • Independent, third-party
  • 18+ years in quality
  • Bangladesh · Dubai & Singapore next

At a glance

Five services,one way of working.

Pick one, or combine them. Every service ends the same way: clear evidence you can act on.

Worker at a cutting table in a garment factory during inspection 01

Independent Inspection

We check the goods against your standards before they ship, not after.

  • Pre-production
  • Inline
  • Final
  • Pre-shipment
See details Brand quality assurance specialist checking garments with a tablet 02

Brand-Direct QA & Technical Support

Dedicated QA and technical support for brands with no local office in Bangladesh.

  • Your SOPs
  • Fabric to shipment
See details Operator sewing at an industrial machine during a technical audit 03

Technical & Quality Audit

We look at how the work is made and the system behind it.

  • Workmanship
  • Measurement
  • Process
  • QMS
See details Inspector checking garments on a rail at a supplier facility 04

Factory & Supplier Assessment

We see what a supplier can really do, and keep checking.

  • Capability
  • Monitoring
  • CAPA
See details Close-up of denim jeans checked during quality improvement 05

Quality Improvement

We find the root cause, fix it and train your people.

  • RCA
  • Defect reduction
  • KPI
  • Training
See details
18+Years working in quality
5Core services
3Clear verdicts: PASS, HOLD, FAIL
BangladeshToday. Dubai & Singapore next.
VerifySee the facts on the floor
IdentifySpot risks early
ImproveFix the cause
AssureGive you clear evidence

01 · Independent Inspection

Four checkpoints,from first cut to final carton.

We visit the factory, check the goods against your standard and tell you straight what we find. Choose a stage to see what happens.

Before cutting and sewing start

Pre-production inspection

We check that the factory is truly ready for your order, before a single metre of fabric is cut.

What we check

  • Fabric and trims against approved samples
  • Pre-production sample and spec sheet
  • Machines, line set-up and operator skills
  • Packing and labelling materials

What you get

A clear go / no-go view before any risk turns into a cost.

Cutting table in a garment factory during pre-production inspection
01Pre-production
While production is running

Inline inspection

We walk the line early, so problems are caught when they are still cheap and quick to fix.

What we check

  • Stitching and workmanship on the line
  • Measurements against the size chart
  • Repeat defects and where they start
  • Whether earlier comments were fixed

What you get

An early warning, with the fixes agreed on the spot.

Cutting table in a garment factory during pre-production inspection
02Inline
Production finished, goods mostly packed

Final inspection

We pull a random sample from the lot and judge it against your standard. This is the check that decides the shipment.

What we check

  • Random sample, drawn by AQL rules
  • Defects counted as Critical, Major or Minor
  • Measurements, fit and function
  • Packing, labels and cartons

What you get

A PASS, HOLD or FAIL verdict, with photos and numbers behind it.

Cutting table in a garment factory during pre-production inspection
03Final
Just before loading

Pre-shipment inspection

A last look, so the right goods, in the right packing, are what actually leave the factory.

What we check

  • Carton count, marks and labels
  • Packing against your instructions
  • Re-check of earlier open points
  • Readiness for loading

What you get

Confirmation that you can ship, or a clear reason to wait.

Cutting table in a garment factory during pre-production inspection
04Pre-shipment

Not sure which stage fits your order?

Tell us about your order

02 · Brand-Direct QA

Your quality team,on the ground.

No local office or representative? We act as your brand-direct quality partner, working to your own SOPs from the first fabric check to the shipment.

Brand quality assurance specialist checking garments with a tabletFor international brands

Brand-Direct Quality Assurance & Technical Support

For international brands without a local office or representative in Bangladesh, we provide dedicated, brand-direct quality assurance and technical support aligned with their specific SOPs, technical requirements and quality standards, from fabric in-house inspection and production monitoring through final inspection and shipment readiness.

  • Technical supportAligned with your SOPs, technical requirements and quality standards.
  • Fabric in-house inspectionFabric checked in-house, at the factory.
  • Production monitoringFollowing your order through production, against your SOPs.
  • Final inspectionFinished goods checked against your quality standards.
  • Shipment readinessConfirming the order is ready to ship.

What you get

One dedicated QA contact on the ground, working to your standards from fabric to shipment.

Talk about brand-direct QA

03 · Audit & Assessment

See how the work is made,and who is making it.

A good result today does not guarantee one tomorrow. These two services look at the people, process and system behind your product.

Operator sewing at an industrial machine during a technical auditBehind the result

Technical & Quality Audit

We look at how the work is made, not only what came off the line: stitching, measurements, processes and the system behind them.

  • WorkmanshipHow stitching, finishing and handling are really done day to day.
  • MeasurementWhether sizes and tolerances are properly controlled.
  • Process complianceWhether the factory follows its own procedures and your requirements.
  • QMS evaluationHow strong the quality system behind the work really is.

What you get

A plain list of the gaps we found, in the order you should fix them.

Inspector checking garments on a rail at a supplier facilityKnow your partner

Factory & Supplier Assessment

New supplier, or an old one you worry about? We see what they can really do, track how they perform and check that fixes actually happen.

  • Supplier capabilityWhat this factory can really deliver, in volume, skill and equipment.
  • Performance monitoringHow the supplier performs over time, not only on one good day.
  • CAPA verificationWe check that corrective and preventive actions were actually carried out.

What you get

An honest view of whether this factory can deliver your order.

04 · Quality Improvement

Find the cause,fix it for good.

Finding a defect is the easy part. Making sure it never comes back is the job. We work with your team until the fix holds.

  • Root Cause AnalysisWe trace each defect back to why it happened.
  • Defect reductionWe fix the cause, so the same defect stops coming back.
  • Technical trainingWe train your people so the fix stays in the factory.
  • KPI improvementWe track the numbers, so progress is visible.
Talk about improvement

What you get

A report you can readin minutes, and trust.

  • A clear verdictPASS, HOLD or FAIL on the first page. No guessing.
  • Photos and numbersEvery finding is backed by evidence you can show your buyer.
  • Defects sorted by classCritical, Major and Minor, counted against the allowed limit.
  • Standards we follow
  • ISO 2859-1
  • ANSI/ASQ Z1.4
  • AQL 2.5 · 4.0

See a sample report

Final inspection reportVeritex International
PASS
Defect classAllowedResult
Critical0Not allowed
MajorAQL 2.5Within limit
MinorAQL 4.0Within limit
Packing & labels checked Photos included

Illustrative layout. Real reports carry your order’s own numbers and photos.

FAQ

Quick answersbefore you ask.

The basics, in plain words. If your question is not here, we are happy to answer it directly.

Still have a question?Send us a message

Four: pre-production, inline, final and pre-shipment. Many orders use more than one. If you are unsure which fits, tell us about your order and we will suggest the right one.

Send us the style, quantity, factory and shipping date through the contact form. We reply with the right next step, then plan the visit with you.

Yes. We follow the standard and AQL you or your buyer set. If none is set, we use ISO 2859-1 / ANSI/ASQ Z1.4, general level II, with AQL 2.5 for Major and 4.0 for Minor defects, and Critical defects not allowed.

A clear verdict, the defects counted by class, measurements, packing and label checks, and photos. You can read it in minutes, then dig into the detail if you want to.

PASS: the defects found are below the allowed limit. HOLD: the count sits right on the limit, so you decide whether to ship. FAIL: the limit is passed, or a Critical defect was found.

It depends on the quantity, the number of factories and where they are. Share your details and we will come back with a clear quote and timing.

We serve Bangladesh today, with Dubai and Singapore next.

Yes. We are an independent third party. We report what we see, so the result does not depend on who the factory is.

Got an order coming up?Let’s check it together.

Tell us what you are making and where. We will point you to the right check, and tell you honestly what we find.

How to start

  • Tell us about your orderStyle, quantity, factory and shipping date.
    01
  • We plan and visitWe agree the check and go to the factory.
    02
  • You get the reportClear findings you can act on straight away.
    03
Request a quoteNo obligation. We reply with the right next step.
Scroll to Top